For best results the LED color should be the same as the lens color or if bulb is behind a clear lens, use the appropriate

       LED brake/tail lamps will not flash with stock flasher units due to their extremely low current draw, the turn signals may flash

 LED bulbs may cause some newer vehicles to indicate a bulb is burnt out (because of their low power consumption, car computer misjudge the bulb

Wider viewing angle, lower brightness, vise versa. We cannot recommend which type would work best in your vehicle because it depends on the size, shape

All of our Tail/Brake bulbs achieve dual intensity modes (1157 3157 Bayonet, 7443 T20 Wedge) by turning all of the LEDs on dim or all

YES, no doubt about it!

Basically are classified various types and please click here for detail information.

Introduction of “E series” E = Edison Screw Exx = the diameter in millimeters, even in the U.S., where the bulb glass is listed in 

Definition of LED color AMBER(YELLOW):   There is no such pure yellow color existed in LED Lighting, the Amber color means here Amber with some

●     DIP Through LED (3mm/5mm/8mm/10mm)                                    

SMD LED is generally classified by its size( eg. 5050= 50mm x 50mm, same for  1210 ), 5050 is the only type can be mounted

The operating voltage of a vehicle should be a range but not a fixed number, when we say car’s voltage is 12VDC, which means the