3157: Standard Type with 2 filaments, same functions as 1157/7443

3156 : Standard Type with 1 filament, same functions as 1156/7440

Features & Application :
- 12VDC: Car/Motorcycle/Scooter
- 24VDC:Truck/Trailer/Boat (some boats are compatible in both 12/24V)
- 3157: Same as 1157/7443
- 7440: Same as 1156/7440
- 3157 functions in either 3157(Double) or 3156(Single) sockets and has extra contact that connect to nothing if install for 3156 function, which means 3157 can replace 3156, but 3156 is not available to replace 3157.
Mutual Replaced By or usually well known to call :
3057 3155 3357 3457 4157 3456 4156
3157 or T20 (7443)? How to tell them apart
3157 and T20 (7443) bulbs look almost the same in photos, but their bases are different and cannot be swapped. Forcing the wrong bulb into the socket may damage the socket.
- 3157 series (3157/3156): the plastic base has raised locking tabs on the side. This design is common on American vehicles.
- T20 series (7443/7440): the side of the base is smooth with no raised tabs. This is more common on Japanese vehicles.
The best way to check is to remove the original bulb and compare the side of the base.
Single or dual filament?
Look at the wires at the bottom of the base. A dual filament bulb (3157) has 4 wires, and a single filament bulb (3156) has 2 wires. Because the plastic base is the same size, a 3157 can be used in a 3156 socket: the extra wires only touch plastic and do not connect to anything.
Check polarity before installing an LED 3157
Standard incandescent bulbs have no polarity, but LED bulbs do. Most sockets have the same polarity on the same side of the socket. Some sockets, known as SRCK, use an alternating layout. Installing a standard dual filament LED bulb in an SRCK socket can short the circuit and blow the fuse, so check your socket type first.
Related questions: How LED brake bulbs work in dual intensity / Turn signal “Hyper Flash” issues with LED bulbs
